Rixson Heavy Duty Offset Hung Floor Closer - 427

 Rixson Heavy Duty Offset Hung Floor Closer - 427

Floor closers provide the best mechanical means to support and control a door. They are designed to work with the laws of physics to provide long-lasting performance and reliability.
Recommended for applications where vertical movement of the door at installation is not possible, such as a door inset in an alcove with no ceiling or side jamb clearance.
SKU RIX427-3-4
Weight 10.00 lbs
List price: $1,386.00
Our price: $1,192.00
Hold Position (See ?)
Question Mark
Closer Specification (See ?)
Question Mark
Extended Spindle (See ?)
Question Mark
Hand Option (See ?)
Question Mark
Finishes (See ?)
Question Mark
Cold Weather Fluid (See ?)
Question Mark
20 Minute Label (See ?)
Question Mark
1-1/2" Offset (See ?)
Question Mark
Opening Force (See ?)
Question Mark
Degree of Door Swing
Plate Installation
Question Mark
Arm Type
• Single Acting, Handed
• Exterior or Interior Doors
• Deep Reveal/Alcove Applications
• Weight to 250 lbs.*
• Door Width up to 4'0" (1219mm)
Closer has a tapered spindle and uses a unique bottom arm with special cap to allow door installation
• Built-in positive dead stop prevents door from swinging beyond the desired opening degree ( specify 85°, 90°, 95° or 105° )
Alcove doors can rarely go beyond 90°
• Separate and independent valves for closing speed, latch speed and backcheck
• Available non-hold open (N) or selective hold open (S) at same degree as dead stop
• Delayed action option prefix “DA” ( non-hold open closers only )
• Models available to meet ICC/ANSI A117.1 low opening force requirements, prefix “PH”.
( For 8-1/2 lbs. of opening force prefix “PH” and suffix “8-1/2 lbs.” )
• Cold weather fluid option ( not available for closers with “DA” )
• Sealed closer option 
• Available with floor plate or threshold installation ( floor plate shown )
• Cycolac rustproof cement case
• Standard top pivot: # 180 x 102 included
• Intermediate pivot(s) recommended: 119 ( order separately )
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
• Not available for fire rated openings
• Furnished with wood and machine screws
• Extended spindles available in 1/2" increments up to 2" longer than standard
Rixson 27 Floor Closure
Rixson Model 427 3/4 Offset Technical Information
Adams Rite Cylinder Guard Satin Aluminum Finish
Hagar 4.5in x 4.5in - 8 Hold Ball Bearing Heavy Weight Hinge-BB1199 NRP
Schlage ND-Series - Athens Keyed Leverset-Entry
Yale-4700LN Single Dummy Trim Leverset-Grade 1
Arrow AM Series Mortise Lock - Double Cylinder - Storeroom
Hagar-5100 Heavy Duty Multi Mount Surface Door Closer - Grade 1
End Cap for Hager 4500 Series Heavy Duty Rim Exit Device 36"
Economical 4 Way Auto-Sensing Hybrid DVR - 16CH BNC INPUTS + 8CH IP = 24CH TTL
IP Indoor-Outdoor Bullet Camera - 1/3'' Aptima CMO - 42 IR LED
: *
: *
: *
Type the characters you see in the picture:

Social Media Icons Twitter - Security Product Depot Pinterest at Security Product Depot Facebook for Security Product Depot.com Security Product Depot Blog
Credit Cards