12%

Rixson Heavy Duty Offset Floor Closer - 127

Floor closers provide the best mechanical means to support and control a door. They are designed to work with the laws of physics to provide long-lasting performance and reliability.

Details

SKU RIX127

Weight 10.00 lbs

List price: $4,558.00

Our price: $4,000.00

Options

Hold Position (See ?)

Closer Specification (See ?)

Extended Spindle (See ?)

Hand Option (See ?)

Finishes (See ?)

Cold Weather Fluid (See ?)

20 Minute Label (See ?)

1-1/2" Offset (See ?)

Opening Force (See ?)

Lead Line Door Thickness (See ?)

Degree of Door Swing (See ?)

Installation Plate

Arm Type

Quantity

Ask a question about this product

Application

• Single Acting, Handed

• Exterior or Interior Doors

• Deep Reveal Applications

• Weight to 250 lbs.*

• Door Width up to 4'0" (1219mm)

Features

Recommended for applications where vertical movement of the door at installation is not

possible, such as a door inset in a deep reveal or with no ceiling clearance.

• Closer has a tapered spindle and uses a unique bottom arm to allow door installation

• Built-in positive dead stop prevents door from swinging beyond the desired opening

degree ( specify 85°, 90°, 95° or 105° )

• Separate and independent valves for closing speed, latch speed and backcheck

• Available non-hold open (N) or selective hold open (S) at same degree as dead stop

• Delayed action option – prefix “DA” ( non-hold open closers only )

• Models available to meet ICC/ANSI 117.1 low opening force requirements, prefix “PH”.

( For 8-1/2 lbs. of opening force prefix PH and suffix 8-1/2 lbs. )

• Cold weather fluid option ( not available for closers with “DA” )

• Sealed closer option

• Available with floor plate or threshold installation ( floor plate shown )

• Cycolac, rustproof cement case

• Standard top pivot: #180 included

• Intermediate pivot(s) recommended for non fire rated opening: 119 ( order separately )

• Doors up to 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot

• For fire rated openings ( up to 3 hour assemblies ) prefix “F”. This package will be supplied with a steel top pivot (F180) and a non-hold open closer. Intermediate pivot required: FM19,

( order separately ).

• Fire rated closers cannot have PH option

• For 20-minute labeled doors suffix “-20” to the part number

• Extended spindles available in 1/2" increments up to 2" longer than standard