
• Available in non-hold open (door swings to 130° each direction) (N)
• Available in automatic hold open models – Specify 90 or 105° (A)
• Product should always be used with an auxiliary floor or wall stop
• 1-3/4" doors
• Adjustable closing and latch speeds
• On single acting center hung application, frame stop is required
• 1/2" longer than standard closer spindle is available and must be
ordered as part of the closer, it cannot be added later
• Includes 608011 bottom pivot
• Optional end cap 199 for top and bottom of wood door
• Available in automatic hold open models – Specify 90 or 105° (A)
• Product should always be used with an auxiliary floor or wall stop
• 1-3/4" doors
• Adjustable closing and latch speeds
• On single acting center hung application, frame stop is required
(see part number 60131 on page 92), order separately
• 1/2" longer than standard closer spindle is available and must be
ordered as part of the closer, it cannot be added later
• Includes 608011 bottom pivot
• Optional end cap 199 for top and bottom of wood door
![]() |